How to Reset P1 Wimax Modem Password?

Happy new year 2012 everyone! -CypherHackz.

Many people asked me how to reset P1 Wimax modem password in my article on How to Secure P1 Wimax Modem?

Well it is not that difficult to reset the password actually. Here I will show you the easiest way to reset the password just by using a paper clip. Yes, seriously! Just using a paper clip.

  1. Switch on your P1 Wimax modem.
  2. Find the Reset hole on your modem. I’m using DX230 model and the hole is near to the LAN port. Refer to the image below.

    p1-wimax-dx230-reset-hole

  3. Get a paperclip and press the Reset button through the hole for a few seconds.
  4. The signal indicator lights will start blinking shows that the modem has been successfully reset.
  5. Now go to http://10.1.1.254 in your web browser and enter the default username and password as below:

    Username: admin
    Password: admin123

  6. Congratulations! You have successfully reset your P1 Wimax modem password.

This method is actually reset your modem to its original factory settings. All previous configurations together with the password will be set back to default.

After your modem has been reset, now go back to my article here and secure your P1 Wimax modem before someone else take control your modem.

Comments

  1. afzan omar says:

    i don’t know how to connect my wifi wiggy through the phone??

  2. Khairul Azmi says:

    i have already change my modem password and i do not remember the password. when i reset and put
    iser = admin
    password =admin123
    its not working properly at all .
    can you help me.

    • Are you sure you have reset the modem completely? Switch on the modem, and push the Reset Button using a paper clip through the hole, until the LED blinking.

  3. Hi…i need to change my wifi password but im using the old wifi modem..so where should i can find the reset hole for it..? please help me..

  4. Mula saya guna mcm biasa ok…tapi baru2 ni saya dapat detect P1 tapi saya tak boleh connect dgn wireless..hanya kena guna cable..mcm mana nak buat

  5. do u have any contact number.easy for me to reset my p1 modem password.i pening sekarang

  6. salam…klu buat mcm ni,kirenye hanya kita je yg boleh gune line p1wimax ni kn?klu paswrd modem xleh tuka ek?

  7. Engkarong says:

    how to change user name and password, I cannot do it ,please reply me details .

  8. I followed your how-to instructions to reset my p1 password. When I attempt to re-enter a new password, this msg keeps popping out “old password confirm fail..” Why is that?

  9. 870311

  10. Rebecca says:

    Hello – thanks for the easy to follow instructions. For some reason I cannot connect to http://10.1.1.254 – I have tried in multiple browsers and on multiple computers and it always tells me that it cannot connect. I did a diagnose using IE and it says that the device is not responding correctly. Other than this problem – the device connects fine to the internet fine and computers connect to it just fine, but what’s going on here??? I don’t know how to move forward except call the company.

    • were you opening the site with your p1 connection?
      because if i’m not mistaken,this site is like intranet.
      You can only access the site with p1 connection.

  11. why i cant change my password?

  12. ok

  13. qamar shazad says:

    hi im using p1 wimax modem,even im not using the wire,can i press the reset button?bec that instruction i didn”t do yet.

  14. how would i open my nat type

  15. my modem p1modem is showing “limited access”once conected but no internet connection available y??

Speak Your Mind

*